Crystal Premium interior emulsion is a Rich Matt finish acrylic interior paint that gives satin oaks to your walls. It gives plastic type smooth finish which imparts very good dirt pick up resistance.
It is recommended for all types of interior surface like smooth cement plaster,False ceiling,Asbestos sheet,concrete surfaces with continuous dampness and see pages.
Method of Application
CRYSTAL PREMIUM Interior Emulsion
Special acrylic co-polymer latex.
Brush,Roller,Conventional or Airless spray
As per shade Card, Special Shades can be
made available on request.
Smooth and Eggshells Gloss .
190-210 sq. ft per ltr per coat.
1 Ltr,4Ltr, o Ltr&20LtrPack.
2 years from manufacturing date If kept in
1 Ltr,4Ltr, o Ltr&20LtrPack
New surface should be given enough time to cure. Make the surface smooth and uniform. Clean the surface from grease, loose or flaking particles. Apply a coat of Pacific Cement Prime. (WIT) Or one coat Of CRYSTAL INTERIOR EMULSION diluted with Clean water in ratio by volume. Followed by pacific Wall Putty to level the dents and make the surface uniform.
Using an Emery paper clean the surface free from all loose and powdery material and old paints film apply a coat Pacific Cement primer (WIT) or one coat of CRYSTAL INTER OR EMULSION diluted with clean water in ratio by Followed by Pacific Wall putty to level the dents and make the surface uniform.
Stir Well and Strain before use. Please do not add any kind of chemical or thinner in paint, Over dilution Of Interior Emulsion may in Shade variation. poor hiding. poor bonding. flaking, Excess brushing and Stretching are also to be avoided.
Apply 2-3 coats of CRYSTAL INTERIOR EMULSION thinned 400-450 ml by volume of potable water per letter paint. Allow drying time 34 hours between the coats.
Covering capacity Of the paint will vary depending on substrate, surface preparation, method of application and other factors. The practical covering capacity will differ from the theoretical covering capacity As precaution an initial trial may be undertaken to determine covering capacity of very rough or abnormal surfaces.
An ISO 9001 : 2008 Certified co.
Contact Detail :
Plot No 1914, Phase IV,
Anand, Gujarat 388121