Durable Acrylic Distemper

Home > Durable Acrylic Distemper

Product Description

DURABLE ACRYLIC DISTEMPER is an emulsion based economical distemper which gives. non-chalky smooth, Matt finish to the interior walls. This is a best colorful solution against traditional white wash.

Recommended Usage

It is recommended for all types of interior surface like smooth cement plaster, False Ceiling, Asbestos sheet, concrete surface. Avoid surfaces with continuous dampness and seepage’s.

Technical Data

Product Name	Method Of Application	Shades	Finish	Theoretical Coverage	Pack Size	Shelf Life
DURABLE Acrylic Distemper	Brush, Roller or Spray.	As per shade card	Smooth and Matt.	90-110 sq. ft per Itr per coat.	1, 2, 5, 10 & 20 Kg Pack	2 years from manufacturing date if kept in original air tight containers away from sunlight.

Application Procedure

New Surface

New surface should be given enough time to mature. and uniform. Clean the surface from grease, loose or of PACIFIC Cement Primer (WIT).

Old Surface

Using an Emery Paper clean the surface free from all loose an material and old paints film apply a coat of PACIFIC Cement Primer (WIT).

Finish

Apply 2-3 coats of DURABLE DISTEMPER thinned 700 ml by volume of potable water per kg. Allow drying time 5-6 hours between the coats.

Precaution

Stir Well and Strain before use. Please do not add any kind of chemical or thinner in distemper. Over dilution of DURABLE DISTEMPER may result in shade variation, poor hiding, poor bonding, or flaking. Excess brushing and stretching are also to be avoided.

Note

Covering capacity of the paint will vary depending on substrate, surface preparation, method of application and other factors. The practical covering capacity will differ from the theoretical covering capacity. As precautions, an initial trial may be undertaken to determine covering capacity of very rough or abnormal surfaces.