Product Description

PACIFIC PREMIUM HI-GLOSS ENAMEL is high quality alkyd based enamel with a very high gloss finish. It forms a touch film which is resistant to stains and water. It is suitable for interior and exterior applications.

Recommended Usage

It is recommended for all suitably primed interior and exterior wooden, masonry and metal surfaces. It can be used on furniture, fixtures, oil tankers as well as doors and windows.

Technical Data

Product Name Product Composition Method of Application Shades Finish Supply Viscosity theoretical Coverage Drying Time Over Coating Interval Pack Size Offered Shelf Life
PACIFIC PREMIUM HI-GLOSS ENAMEL Single Pack Modified Alkyd Paint.
Brush,Roller and spray As per shade Card. Smooth and Glossy. 85-90 sec by FC4 @ Room Temperature. 175-215 Sq. ft per Ltr per coat. Touch Dry: 2 hrs
Surface Dry: 2-3 hrs
Hard Dry: 24 hrs
12-14 hrs 50, 100, 200, 500ml, 1, 4, 10 & 20 Ltr 2 years from manufacturing date if kept in original air tight Containers away from direct sunlight.

Application Procedure

Prepare the surface by sanding with emery paper 180 and remove loose particle, old cracked paint, dust and grease. Wipe the surface clean before painting. Depending on the type of surface apply one coat of primer- For Metal Surface Apply Pacific Metal Primer, for Wooden Surface apply Pacific Wood Primer White and for Concrete Surface use Pacific Cement Primer and left it dry for 6-8 hours. Repair all cracks and dents on the surface by applying suitable Filler/Putty. Ensure proper drying of The Putty/Filler. Apply another thin coat of primer and let it dry for 6-8 hours and sand it using Emery Paper 320. Apply 2 coats of PACIFIC PREMIUM HI-GLOSS ENAMEL by thinning it down using approx 10 % Pacific General Purpose Thinner. Interval between the coats should be at least 8 hours.

Safety Information

Store in well ambient conditions, ventilated locations & away from the source of ignition and fire. Keep away from children. In case of eye I skin contact wash with plenty of water. Inhalation/injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases. Do not apply when ambient temperature might drop to level below ICC within 4 hrs of application. Avoid extra thinning for better results. The container must be tightly closed when not in use. Stir well and strain before use. Use safety equipment like rubber or polythene gloves, safety goggles/glasses & face mask.


Covering capacity Of the paint will vary depending on substrate, surface preparation, method of application and other factors. The practical covering capacity will differ from the theoretical covering capacity As precaution an initial trial may be undertaken to determine covering capacity of very rough or abnormal surfaces.

PROUDLY POWERED BY Brainbean Technolabs