Pacific Special Interior Glow Paints is an acrylic interior emulsion with Special properties GLOW in dark. It gives decorative looks with lighting effects to your interior walls.
It is recommended for all types of interior surface like smooth cement plaster, False Ceiling, Asbestos sheet, concrete surface. It is also use as safety paints in public room, cine halls, and Staircase. This special product also use in dwelling house, show rooms, kid’s room and also in discotheques. Avoid surfaces with continuous dampness and seepages.
Method Of Application
PACIFIC SPECIAL GLOW IN DARK INTERIOR
Brush, Roller, Conventional or Airless Spray
Two shades Green and Orange.
Smooth and Matt
25-30 sq. ft per Kg per coat.
50 gms, 100 gms and 200 gms.
6 months from manufacturing date If kept in original air tight Containers away from sunlight.
New surface should be given enough time to cure. Clean the surface from grease, loose or flaking particles. Apply a coat of Pacific Interior Cement Primer (WIT). Apply two coat of Pacific Smart Care White Cement based Polymer putty or Pacific Acrylic wall putty with proper interval between two coats. Gently level the surface with fine emery paper and remove all dust powder proper from the surface. Make the surface smooth and uniform. Apply a coat of Pacific Interior Primer or one coat of Diamond Luxury Emulsion WHITE diluted with clean water in 1:1 ratio by volume.
Using an Emery Paper clean the surface free from all loose and powdery material and old paints film, Apply a coat of Pacific Interior Primer or one coat of Diamond Luxury Emulsion WHITE diluted with clean water in 1:1 ratio by volume.
Apply 2 coats of Pacific Glow in dark paint thinned with required volume of potable water as per application tools like brush, roller or spray. Allow drying time 3-4 hours between the coats.
After Glow Effect In Dark
Green and Orange shades would have afterglow duration approximately between 30 minutes to 1 hour. However the painted surface is more glow as it captures more light from any source.
Apply 2 coats of Diamond Luxury Emulsion WHITE as a Base coat, thinned with 30-40 % by volume of potable water. Allow drying time 3-4 hours between the coats.
Stir well and Strain before use. Please do not add any kind of chemical or thinner in paint. Over dilution of paint may result in shade variation, poor hiding, poor bonding, or flaking. Excess brushing and stretching are also to be avoided.
After Glow phenomena is works for approximately three to four years. It also depends on proper film thickness and application method of finish panels. The ideal film thickness is achieved by 2 to 3 coats of this paint. Apply extra clear coat for increase life of painted surface.
An ISO 9001 : 2008 Certified co.
Contact Detail :
Plot No 1914, Phase IV,
Anand, Gujarat 388121